Harmar Enclosed Vertical Platform Lift (EPL)

/, Harmar Vertical Lifts, Vertical Lifts/Harmar Enclosed Vertical Platform Lift (EPL)
­

Harmar Enclosed Vertical Platform Lift (EPL)

Enclosed Vertical Platform Lift (EPL) Spec Sheet

  • Constant pressure paddle switch with emergency stop (key switch optional)
  • Fixed or pit-mounted ramp provides easy entry when lift is lowered and additional stability when lift is raised
  • Enclosure can be assembled from the lift platform
  • OPTIONS:
  • Plexiglass panels
  • Dome roof
  • key locks
  • Interior ventilation or lighting
  • Made in USA

  • Rated Load: 750 lbs. (340 kg.)
  • Drive: Belt driven ball screw / 90 VDC 1/2 hp motor with brake. Optional 24 VDC battery powered unit
  • Power Supply: 115 VAC – 20 amp grounded circuit / 220 VAC (optional)
  • Control Circuit: 24 VAC (Low Voltage Controls)
  • Standard Platform: 36″ x 60″ & 42″ x 60″ (straight-through) with 42″ (107 cm) high guard panels and grab rail / stationary ramp
  • Footprint: 50″ x 54″ (127 cm x 137.2 cm)
  • Speed: 10 fpm (3 mpm)
  • Controls: Constant pressure paddle switch with emergency stop (key switch optional)
  • Manual Lowering: Provided
  • Safety Design: ASME A18.1, Section 2 – Vertical Platform Lifts
  • Standards: CSA B44.1 / ASME A17.5 – Elevator & Escalator Equipment
  • Safety Features: Safety pan, final limit, ball nut safety backup, belt monitor and non-skid surface
  • Warranty: 2-Year parts / 1-Year on outdoor units

Product Description

This self-contained Enclosed Platform is built to Harmar’s exacting VPL standards with powder coated steel enclosure panels, providing vertical access indoors or out, with up to a 14’ rise.

Indoors, they offer a self-contained, neater appearance and outdoors provide weather protection. Either way, the ready-to-install design saves installation time and does not require modifications to structures or landscaping.

  • Constant pressure paddle switch with emergency stop (key switch optional)
  • Fixed or pit-mounted ramp provides easy entry when lift is lowered and additional stability when lift is raised
  • Enclosure can be assembled from the lift platform
  • OPTIONS:
  • Plexiglass panels
  • Dome roof
  • key locks
  • Interior ventilation or lighting
  • Made in USA

  • Rated Load: 750 lbs. (340 kg.)
  • Drive: Belt driven ball screw / 90 VDC 1/2 hp motor with brake. Optional 24 VDC battery powered unit
  • Power Supply: 115 VAC – 20 amp grounded circuit / 220 VAC (optional)
  • Control Circuit: 24 VAC (Low Voltage Controls)
  • Standard Platform: 36″ x 60″ & 42″ x 60″ (straight-through) with 42″ (107 cm) high guard panels and grab rail / stationary ramp
  • Footprint: 50″ x 54″ (127 cm x 137.2 cm)
  • Speed: 10 fpm (3 mpm)
  • Controls: Constant pressure paddle switch with emergency stop (key switch optional)
  • Manual Lowering: Provided
  • Safety Design: ASME A18.1, Section 2 – Vertical Platform Lifts
  • Standards: CSA B44.1 / ASME A17.5 – Elevator & Escalator Equipment
  • Safety Features: Safety pan, final limit, ball nut safety backup, belt monitor and non-skid surface
  • Warranty: 2-Year parts / 1-Year on outdoor units

EPL-Enclosed-Vertical-Platform-Lift-001 EPL-Enclosed-Vertical-Platform-Lift-002 EPL-Enclosed-Vertical-Platform-Lift-003 EPL-Enclosed-Vertical-Platform-Lift-004

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.